Radium Engineering - Swivel Press-In Fittings, Nissan Valve Covers

Radium Engineering low profile swivel fittings simply press-in. No drilling or welding required.

INSTALLATION INSTRUCTIONS

FEATURES
-Stainless/Aluminum Construction
-Anodized and Laser Engraved
-Swivel Action with Viton O-Rings
-Simple Press-Fit Installation

20-0808
This low profile 10AN fitting is a direct replacement for the PCV valve on the intake side of the valve cover for the following:
Nissan Skyline RB25DET
Nissan Skyline RB25DET NEO
Nissan Silvia SR20DET (S14 and S15 Only)
Nissan Silvia Primera SR20DE (S14, S15, P11 Only)
Nissan Bluebird Primera Wingroad SR20VE
Nissan X-Trail SR20VET
Nisssan GT-R VR38DETT (07-08 Only)

20-0809
This low profile 12AN fitting is a direct replacement for Nissan RB26DETT valve cover fittings.

20-0810
This low profile 10AN fitting is a direct replacement for the valve cover barb found on the intake side of the Nissan KA24DE S13/S14 valve cover. This fitting has a slight angle on the flange in an attempt to match the casting draft angle on the KA24DE valve cover. It is normal for there to be a slight gap after installing. When installing into the valve cover, the flat spot should be facing upwards.

20-0811
This low profile double ended 10AN banjo fitting is a direct replacement for the valve cover barbs found on the exhaust side of the Nissan SR20DET S13 valve cover. 

20-0812
This low profile 10AN banjo fitting is a direct replacement for the valve cover barb found on the exhaust side of the Nissan SR20DET S14/S15 valve cover.

20-0813
This low profile 10AN banjo fitting is a direct replacement for the intake and exhaust crankcase fittings found on all Nissan RB25DET valve covers (non VVT-i and VVT-i). There is one on the intake valve cover and one on the exhaust valve cover. If replacing both OEM fittings, quantity 2 must be purchased.

Below is a list of other compatible Nissan engines:

CG10DE
CG13DE
CGA3DE
CR12DE
CR14DE
GA15DE
GA16DE
HR12DDR
HR12DE
HR15DE
HR16DE
KA24DE (99-01 Bassara Only)
QG13DE
QG15DE
QG18DD
QG18DE
RB20DE
RB25DE
RB25DET
SR16VE
SR18DE
SR20DE (S14, S15, P11, N30 Only)
SR20DET (S14 and S15 Only)
SR20VE
SR20VET
TB48DE
VQ20DE
VQ30DE
VQ30DET
VR38DETT (07-08 Only, Mounted to Separator)

You can enjoy the benefit of Affordable Flat Rate Shipping on every product!

Product Application:

Auto racing and aggressive driving are inherently dangerous activities. Some modifications may affect the handling characteristics of your vehicle. All products sold by True Focus Fabrication LLC are for off-road use only. Any other use or application of our products is the responsibility of the purchaser and/or user. Some modifications and installation of certain aftermarket parts may void your vehicles original dealer warranty. Modification of your vehicle may create dangerous conditions, which could cause serious bodily injury or death. Buyers and users of these products hereby expressly assume all risk associated with any modification and use. True Focus Fabrication also recommends that all products be installed by a trained professional only. Always use jack stands to support your vehicle once it is lifted to avoid serious injury or death in the event that the jack or bash bar fails.

​Order Cancellation:

Orders can be cancelled for a 5% fee up to 24 hours after the order has been placed. After 24 hours, order cancellations will be subject to a 40% restocking fee.

We reserve the right to cancel orders at our discretion if we suspect the order is fraudulent. We will attempt to contact you before cancelling. 

Warranty:

All True Focus Fabrication products carry a three year warranty against manufacture weld defects due to normal use. Products that have failed due to customer misuse or abuse will not be accepted for warranty or refund. Please contact us via email at Contact@truefocusfab.com before returning products.

Returns:

All returned products and canceled orders are subject to a 40% restocking fee. Returns are subject to inspection to ensure that the product is still in new condition and has not been installed. The customer is responsible for return shipping fees. Returns will only be accepted up to twenty one days after the ship date. True Focus Fabrication is not responsible for return shipping costs. Please contact us via email at contact@truefocusfab.com before returning products.