Product Care
Follow these tips to keep your TFF products looking great and working at their best!
Bash Bars and Parachute Bars:
Some surface rust is possible if the bar is left uncoated. Surface rust is not permanent and can be removed. To prevent this, we recommend at the minimum using primer and spray paint to coat the bar. Powder coating will give a longer lasting and more durable finish.
Before spray painting, we recommend using a red scotch bright pad to scuff the metal surface until hazy. Next , wipe all dirt and grease off the bar with acetone. Bare metal rust prevent primer is recommended before painting.
Aluminum Tanks:
Aluminum is a very soft metal and is easily scratched, please handle with care. Any finger prints left on the tank during install will be very difficult to remove once the care is driven and heat cycled. After install we recommend wiping down the entire tank with glass cleaner and a microfiber towel.
Anodized Tanks:
Anodized tanks may fade if exposed to direct sunlight for extended periods of time. Discoloration in high heat areas may happen on some products and cannot be prevented.
----------------------------------------------------------------------------------------------------------------
True Focus Fabrication LLC Terms of Sale
Effective 12/01/2022. By placing an order with True Focus Fabrication LLC ("TFF"), you ("Buyer") agree to these terms.
1. Off Road and Competition Use Only
All TFF products are sold for off road and closed course competition use only. They are not designed, tested, or certified to meet any Federal Motor Vehicle Safety Standard (FMVSS), DOT, or state vehicle code requirement. TFF products are not safety devices and are not designed or tested to protect vehicle occupants in a collision. Any use on public roads is at Buyer's sole risk and may violate state or local law.
2. Effect on Your Vehicle
Replacing or modifying factory bumper reinforcements or other structural parts can change how a vehicle handles and how it behaves in a collision, including crush zones and airbag deployment. Modifications may void the vehicle manufacturer's warranty and may affect your insurance coverage.
3. Professional Installation and Inspection
TFF products must be installed by a trained professional, following TFF's instructions and the vehicle manufacturer's specifications, with proper hardware and torque. TFF does not install products and is not responsible for installation done by Buyer or anyone else. Inspect the product and its mounts before each use and after any impact. Stop using any product that is bent, cracked, or has damaged welds or mounts. Never work under a vehicle supported only by a jack or by a TFF product. Always use rated jack stands.
4. Assumption of Risk
Motorsports, off road driving, and aggressive driving are inherently dangerous and can cause property damage, serious injury, or death. Buyer understands these risks and voluntarily assumes all risks of installing, modifying, and using TFF products, including risks created by Buyer or by any installer, driver, or passenger.
5. Release
To the fullest extent permitted by law, Buyer releases True Focus Fabrication LLC and its owners, employees, and agents from, and agrees not to sue them for, any claim, loss, or damage arising out of the installation, modification, or use of TFF products, including claims based on TFF's ordinary negligence. This release does not apply to any claim that cannot be waived under applicable law.
6. Limited Warranty
TFF warrants its products against defects in weld workmanship under normal use for two (2) years from the ship date. This warranty does not cover damage from impact, racing or off road incidents, improper installation, modification, misuse, abuse, corrosion, coating, or normal wear. To make a claim, email contact@truefocusfab.com before returning any product. TFF's only obligation under this warranty, at TFF's option, is to repair or replace the product or refund the purchase price.
ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE TWO (2) YEAR DURATION OF THIS WRITTEN WARRANTY. TFF IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow limits on how long an implied warranty lasts or the exclusion of incidental or consequential damages, so these limits may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
7. Limitation of Liability
To the fullest extent permitted by law, TFF's total liability for any claim relating to a product will not exceed the price Buyer paid for that product.
8. Indemnity
Buyer will defend, indemnify, and hold harmless TFF from any third party claim arising from Buyer's installation, modification, or misuse of a TFF product, its use on public roads, or any use in violation of these terms.
9. Resale and Transfer
If Buyer sells or gives away a TFF product, or installs it on someone else's vehicle, Buyer will give the new owner or user a copy of these terms and all TFF warnings.
10. Returns
Returns are accepted up to 21 days after the ship date and are subject to a 40% restocking fee. Products must be new, uninstalled, and uncoated; painted or powder coated products cannot be returned. Buyer pays return shipping. Email contact@truefocusfab.com before returning any product, and check fitment before coating.
11. Governing Law and Venue
These terms are governed by Colorado law. To the extent permitted by law, any dispute will be brought in the state or federal courts located in El Paso County, Colorado.
12. Entire Agreement and Severability
These terms are the entire agreement between Buyer and TFF about TFF products. If any part is found unenforceable, the rest stays in effect.