Chevy C5 / C6 Corvette - Drag Parachute Mount
Chevy C5 / C6 Corvette - Drag Parachute Mount
Chevy C5 / C6 Corvette - Drag Parachute Mount
Chevy C5 / C6 Corvette - Drag Parachute Mount
Chevy C5 / C6 Corvette - Drag Parachute Mount
Chevy C5 / C6 Corvette - Drag Parachute Mount
Chevy C5 / C6 Corvette - Drag Parachute Mount
Chevy C5 / C6 Corvette - Drag Parachute Mount

Chevy C5 / C6 Corvette - Drag Parachute Mount


Finish
Select Vehicle
Regular price€274,82
/
Shipping calculated at checkout.
  • Flat Rate USA & Canada Shipping ✅
  • Worldwide Shipping Available ✅

True Focus Fabrication Parachute Mounts are designed for cars that are being pushed to the limit and are exceeding 150mph at the drag strip. This fully TIG welded bar bolts onto the factory crash bar location and fits under the stock rear bumper. The center bar exits the bumper just under the license plate, so drilling a 2" hole in your rear bumper will be required.

Check out our Drag Parachute Kit for a complete parachute setup!

FEATURES:

  • Fully TIG welded 1.5”x.120” & 1”x.095" mild steel tubing
  • Fits behind stock bumper ( 2" hole will need to be drilled in rear bumper)
  • Chromoly tubing interlocks
  • 3/16" CNC Laser cut plates 
  • Removable parachute pack mount
  • Mounting hardware included
  • Custom powder coat colors available by request
  • Clears most drag wings

INSTALLATION:

C5: To install this parachute mount, first remove your rear bumper and foam crash bar from the car. Next, hold or clamp the parachute mount base onto the rear metal frame rail. Check that the bar is level and exactly centered on the frame rail (horizontally & vertically). Mark the locations of the 6 mounting holes and drill 1/2" holes through only the outer layer of the crash bar. For the best results, start with a 1/8" or 1/4" drill bit then step up to a 1/2" bit, drilling at medium speed.

Now insert the backing plate inside the crash bar and align with the drilled holes. Install the parachute mount with the provided hardware and tighten all bolts. Mark on the inside of the rear bumper under license plate where the mount contacts the bumper and drill a 2" hole for the mount to pass through the bumper. Route parachute release cord and reinstall the bumper.

C6: To install this parachute mount, first remove your rear bumper and foam crash bar from the car. Next, hold or clamp the parachute mount base onto the rear metal frame rail. Check that the bar is level and exactly centered on the frame rail (horizontally & vertically). Mark the locations of the 6 mounting holes and drill 1/2" holes through both layers of the crash bar. For the best results, start with a 1/8" or 1/4" drill bit then step up to a 1/2" bit, drilling at medium speed.

Now install the parachute mount with the provided hardware and tighten all bolts. Mark on the inside of the rear bumper under license plate where the mount contacts the bumper and drill a 2" hole for the mount to pass through the bumper. Route parachute release cord and reinstall the bumper.

* This product is not intended for street use - off-road use only *

BUILD TIMES:
• Raw Finish - Up to 1 week
• Powder Coated Satin Black - Up to 2 weeks

Custom bash bars are available as well! Please email us at Contact@truefocusfab.com for custom work!

You can enjoy the benefit of Affordable Flat Rate Shipping on every product!

Product Application:

Auto racing and aggressive driving are inherently dangerous activities. Some modifications may affect the handling characteristics of your vehicle. All products sold by True Focus Fabrication LLC are for off-road use only. Any other use or application of our products is the responsibility of the purchaser and/or user. Some modifications and installation of certain aftermarket parts may void your vehicles original dealer warranty. Modification of your vehicle may create dangerous conditions, which could cause serious bodily injury or death. Buyers and users of these products hereby expressly assume all risk associated with any modification and use. True Focus Fabrication also recommends that all products be installed by a trained professional only. Always use jack stands to support your vehicle once it is lifted to avoid serious injury or death in the event that the jack or bash bar fails.

Order Cancellation:

Orders can be cancelled for a 5% fee up to 48 hours after the order has been placed. After 48 hours, order cancellations will be subject to a 40% restocking fee.

We reserve the right to cancel orders at our discretion if we suspect the order is fraudulent. We will attempt to contact you before cancelling. 

Warranty:

All True Focus Fabrication products carry a three year warranty against manufacture weld defects due to normal use. Products that have failed due to customer misuse or abuse will not be accepted for warranty or refund. Please contact us via email at Contact@truefocusfab.com before returning products.

Returns:

All returned products and canceled orders are subject to a 40% restocking fee. Returns are subject to inspection to ensure that the product is still in new condition and has not been installed. The customer is responsible for return shipping fees. Returns will only be accepted up to twenty one days after the ship date. True Focus Fabrication is not responsible for return shipping costs. Please contact us via email at contact@truefocusfab.com before returning products.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 6 reviews
100%
(6)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
H
Herman Smith (Fort Worth, US)
Outstanding customer service and product

I ordered the C6 parachute mount and parachute kit. They made the mount from scratch..had it on its way in just a couple days and stayed in touch with me throughout the entire transaction.

T
Travis Wester
C6 parachute mount

Absolute high quality product, you can tell these guys really care about what they let leave the shop!!

J
Jerry Redinger (Indian Head, US)
Amazing Customer Server and Product

Fast response time, Great Communication and recommendations and Great Product.

R
Ryan Marlow (Fort Worth, US)
Great product

Install was straight forward, super nice mount, opted for the custom powder coat, got it in white, good quality and customer service was awesome, always emailed back in a timely manner and even kept me updated on time frames ect, without me having to contact them. Good group of guys. Wish I could upload some pics

f
faisal al khaldi (Riyadh, SA)
Good+++

Good+++

C
Cody Pierson (Kalispell, US)

Fits perfect

You may also like


Recently viewed